Metal Ops Standing Seam Panels
Florida's most complete line of factory-roll-formed standing seam and exposed-fastener metal roofing panels — HVHZ-approved and Kynar 500 finished.
Why Metal Ops
Factory-Formed Panels. Florida-Approved Performance.
Metal Ops manufactures standing seam and exposed-fastener roof panels that are tested, approved, and engineered for Florida's high-velocity hurricane zone requirements. Every panel profile carries current Florida Product Approval — including HVHZ certification for Broward and Miami-Dade counties.
Caliber Construction Group sources Metal Ops panels because the quality, consistency, and documentation standards are built for Florida's demanding code environment. When a permit requires backup, the approval sheets are ready.
- Factory roll-formed panels with tight dimensional tolerances for clean, consistent seams on every run
- 22, 24, and 26-gauge Galvalume steel options plus .032 and .040 aluminum
- Copper panels available on F-15 Mechanical Seam profile for premium applications
- 70% PVDF (Kynar 500) coating on all panels — superior fade and chalk resistance
- Up to 40-year material and finish warranty
- Florida License: #CCC1331638
Panel Profiles
Five Profiles. One Standard.
From concealed-fastener mechanical seam to exposed-fastener utility panels — every profile is Florida Product Approved and available in the full Kynar 500 color range.
HVHZ ✓
F-15 Mechanical Seam
The premier concealed-fastener profile. Fully locked, watertight panel that allows thermal movement without compromising the seal. Ideal for low-slope applications starting at 1:12 pitch.
.032 / .040 Al, Copper
HVHZ ✓
F-15 Snap Lock
The most popular concealed-fastener profile for residential installations. Panels snap together with no special tools required, reducing installation time while delivering a clean, architectural standing seam finish.
.032 / .040 aluminum
HVHZ ✓
F-10 Nailstrip
A versatile snap-lock panel with a factory-formed nailstrip flange that speeds installation while maintaining a clean standing seam appearance. Excellent value for high-volume residential re-roofs where installation efficiency matters.
.032 / .040 aluminum
HVHZ ✓
F-15 Nailstrip
A taller-seam version of the nailstrip profile — the 1.5″ seam height provides a bolder standing seam shadow line while retaining the installation speed advantage of the nailstrip attachment method.
.032 / .040 aluminum
HVHZ ✓
F-5V Crimp
The classic exposed-fastener panel widely used on commercial buildings, agricultural structures, and utility applications. The distinctive V-crimp profile delivers exceptional structural rigidity with simple installation — no special seaming equipment required. A cost-effective solution for commercial re-roofs and large-format projects where the exposed fastener aesthetic is acceptable.
.032 / .040 aluminum
Finish & Color
Kynar 500® Color Palette
Every Metal Ops panel is finished with 70% PVDF — the Kynar 500 coating standard. Over 30 standard colors are available through Metal Alliance, with custom colors available on qualified orders.
Representative Color Selection — Kynar 500 / Metal Alliance
Download the complete Metal Alliance Kynar 500 color chart to see every available shade with finish specifications and material codes.
Download Full Color Chart (PDF)Performance Standards
Engineered for Florida
Florida Building Code
Florida Product Approval Numbers
Every Metal Ops panel profile carries current Florida Product Approval for both HVHZ and standard non-HVHZ applications. Required documentation is available for permit submission.
| Panel Profile | Type | FL Approval # (HVHZ) | FL Approval # (Non-HVHZ) | Gauge / Material | HVHZ |
|---|---|---|---|---|---|
| F-15 Mechanical Seam | Mechanical Standing Seam | FL31653.03 | FL31653.08 | 22/24/26 ga, .032/.040 Al, Copper | ✓ Yes |
| F-15 Snap Lock | Snap-Lock Standing Seam | FL30780.03 | FL30780.04 | 24/26 ga steel, .032/.040 Al | ✓ Yes |
| F-10 Nailstrip | Nailstrip Snap-Lock | FL29523.03 | FL29523.04 | 24/26 ga steel, .032/.040 Al | ✓ Yes |
| F-15 Nailstrip | Nailstrip Snap-Lock | FL29523.03 | — | 24 ga only for HVHZ | ✓ 24 ga only |
| F-5V Crimp | Exposed Fastener | FL31652.01 | FL31652.02 | 24/26 ga steel, .032/.040 Al | ✓ Yes |
Metal Roofing Specialists
Ready to Specify Metal Ops for Your Project?
Our metal roofing specialists will help you select the right panel profile, gauge, and Kynar 500 color for your project — residential, commercial, or specialty application.